If you have a dirt bike, or are looking into purchasing one, you should definitely consider getting a stand for your bike. A dirt bike stand will help you keep your bike protected, prevent it from getting damaged, and make it much easier for you to work on the bike.
There are many different dirt bike stands available. To help you select the best stand for your dirt bike, we have conducted a review of the five top products on the market. Read through our reviews to help you decide which product to purchase.
TOP 5: Dirt Bike Stand Reviews
Product Image & Rating (Out Of 10)
The Extreme Max Hydraulic Lift Table will make raising your dirt bike simple. This product can raise your bike up to 34.5 inches off the ground. Working on your bike or performing repairs will be much easier when you select this option.
You'll find that operating the lift is very simple. It has a foot pedal that you simply have to pump to lift your bike or lower it back down.
There is a locking bar to lock the lift in place one you set it to your desired height. This will prevent it from accidental being lowered down before you are ready.
The lift's platform has a rubber top designed to keep your bike protected and prevent any accidental scratches. The platform is 16.25 inches by 13.25 inches.
This lift can hold bikes up to 300 pounds. All the hardware you'll need is included with your purchase.
The Risk Racing Adjustable Top Magnetic Stand is another option for you to consider. The top of this stand can be adjusted, allowing different bike types and designs to stay level when they are on the stand.
This product features a large top and base. These features are designed to provide stability for bikes of different sizes. The top of the base has a rubber top to prevent your bike from sliding or getting damaged.
The side panels of the stand are magnetic to allow them to hold onto tools and bolts for you. You can use this feature to prevent items from getting lost when you're working on your bike or to store materials you'll need for later use right on the stand.
Another lift stand for you to consider is the Dragway Tools Adjustable Dirt Bike Lift Jack Stand. This model is designed to be used for storing your bike when it isn't in use or for performing service or maintenance.
The stand can be raised to a height of up to 16 inches. The lowest height setting is 10.25 inches. This model can support up to 350 pounds.
The stand's platform is 11.75 inches by 9.25 inches. It is covered with rubber to protect your bike and prevent it from sliding off the stand.
If you're looking for a fixed stand, the Goplus Dirt Bike Panel Stand is a good option to look at. This product features steel construction and a powder coat finish. These features are designed to ensure the stand can safely support the weight of your bike and help it to last for a long time.
Unlike other stands that can only support around 300 pounds, this model has an impressive 1,000-pound capacity. The platform is a 10-inch square designed to keep different bike types stable and secure.
While it is a heavy-duty product that can support a lot of weight, this item is also easily portable. It weighs just 8.6 pounds, so you could pack it with your bike when you head out to always have a stand available. It also features a more compact design and won't take up a lot of storage space in your garage.
The OxGord Kickstand Triangle Lift can help you easily prop your bike up and stop it from tipping over. This stand comes with three different end pieces, allowing you to insert it into axels between 11 millimeters and 18 millimeters.
The stand is designed to support your bike and keep it upright on different surface types including gavel, pavement, dirt, sand, or ice.
This is a quality product made from power-coated steel. It is lightweight and easy to bring with you.
Since this product doesn't get permanently installed onto your bike, it is a good option if you don't want to have a kickstand, but want to be able to prop up your bike at times. The manufacturer includes a one-year warranty with your purchase.
When working on your dirt bike, a dirt bike stand will make the task much easier. A stand can also help protect your dirt bike when you aren't riding, since laying it down on its side is not a good idea. There are a few different factors you'll want to keep in mind before you order a new dirt bike stand since all options are a little different.
The first decision you need to make is the biggest one: you need to decide on which stand type you would prefer to purchase. There are four different dirt bike stand types you'll find. They are fixed stands, lift stands, hydraulic scissor lift stands, and triangle stands.
A fixed stand, as the name implies, has a fixed height. You won't be able to adjust the height and will need to lift your bike up onto the stand. You can also find fixed stands that fold for more compact storage or easier transport.
A lift stand allows you to more easily lift your bike off the ground. Lift stands slide under your dirt bike and have a pedal or pump that will let you raise or lower the bike.
Hydraulic scissor lift stands are a more expensive option that is most typically found in workshops. This stand type allows you to raise your dirt bike to a height where you'll be able to remain standing to work on it.
Finally, a triangle stand is designed to function as a kickstand, since dirt bikes don't typically have one. This stand type attaches to your bike's rear tire to prop it up and prevent it from tipping over.
You will also want to consider the different height options before making a purchase. How high can the stand go (or what is the set height). Look for an option that will allow you to easily perform maintenance and repairs to your bike.
If you're planning on bringing the stand with you anywhere, you will want to look for a more portable option. There are some folding fixed stands, or you could select a triangle stand. These options would make it easier for you to stand up your bike when you're away from your home.
Finally, be sure to keep your budget in mind. Look for a stand that both fits your budget and your needs.
We think all five of the dirt bike stands we reviewed above are great options to consider. We included a few different types of stands to give you some options when selecting the product that will best meet your needs.
While we think you'll be happy with any of the options we included above, the Extreme Max Hydraulic Lift Table is our top pick. We just think this product is simple to use and includes a lot of features you will find useful.
First, we love that you don't have to lift your bike up to get it onto the stand. Since this is a lift, you can simply place your dirt bike on top of the platform and pump the pedal to raise your bike. Once you have finished working on your bike, the pedal will also allow you to safely and easily lower it back to the ground.
To prevent accidental lowering of the lift before you have finished working on your bike, it has a locking bar to lock it in place. This can protect both you and your bike in the event the pedal accidentally gets hit or kicked when you are working on your dirt bike.
The Extreme Max Hydraulic Lift Table has a rubber top. This design feature helps ensure that your bike doesn't get scratched or damaged when it is on the stand. The platform's 16.25-inch by 13.25-inch size should be plenty sufficient to accommodate your dirt bike.
This stand comes with all the hardware you'll need and can support bikes weighing up to 300 pounds.
The Extreme Max Hydraulic Lift Table is an excellent option to consider. But, as we shared above, you really can't go wrong with any of the products we included in our review.
Frequently Asked Questions
What Are Dirt Bike Stands Used For?
You can use a dirt bike stand to hold your bike when you're not riding it. They can also be used to hold your bike up and make it easier for you to perform repairs and work on it.
How High Is a Dirt Bike Stand?
Dirt bike stands have different heights, but most options are between 16 and 17 inches tall.
Is It Bad to Leave a Dirt Bike on Its Side?
Yes, it is not a good idea to lay your dirt bike on its side. Laying it down could cause oil to go above the cylinders, causing damage to the bike. Laying your bike down will also make it more likely that it will get scratched. Instead of laying it down, you should keep your dirt bike upright when it is not in use.
How Do You Get a Dirt Bike onto a Stand?
There are a few better options than lifting your bike straight up and onto its stand. You can try a side panel lift where you tilt your bike to the side and use your hip to help push the bike up onto the stand.
If you're an advanced rider, you could also try a nose or rear wheelie to get your bike up onto its stand.
Dirt bike lift stands are another option to consider. If you choose this option, you won't need to lift or raise the bike on your own at all. A lift stand has a jack, so all you need to do is position the bike over the lift and pump the jack to raise your bike.
Beginner's Guide to riding a dirt bikeIt's important to do all the research you can before purchasing and riding a dirt bike. Riding a dirt bike isn't so difficult but if not careful then you could be really injured. Once you are done reading this guide you will be a pro at riding a dirt bike.
What is a Dirt Bike?
A dirt bike is a type of lightweight motorcycle that is intended for riding on dirt roads and not the main road. A lot of dirt bike designs have rugged tires and suspensions and this is for rough terrains such as dirt, mud, and rocks.
Choosing a Dirt Bike
When deciding on what dirt bike to purchase, there are a few factors that you should take into consideration such as:
Although these sizes are for the average person, your comparability matters more. If the bike too tall or has too much power or has less power then the bike will be very uncomfortable.
Starting Up the Bike
When first starting the bike, you should turn on the battery. Turning on the battery doesn't start the bike but initiates the battery. Once you do that then you need to turn the key in the on positions. A lot of the other bikes will have a button to push in order to turn it in.
Once you turn the key the next thing to do is decide if you need to use the choke. The choke is a switch that you can flip underneath the battery. If it's hot or the bike has been on for a while then you do not need the choke. Once you make the decision then you need to pull in the clutch and go into first gear. The clutch is on the left side and you pull it fully and this places the bike into neutral.
Learning the Clutch and Shifting
The only way to change gears on the dirt bike is to use the shifter. There is no display to show where the shifter is so you are just going to have to learn where they are. On the adult bikes, there are five different shifts of gears.
Usually, neutral is the hardest part for beginners because it is not a full click from the first gear. Lifting the shifter once again will put you in second gear, then third, fourth, and fifth gear. You should practice the movements without being on the bike before trying to ride as to not make a mistake and hurt yourself.
Learning to Move
In order to move, you have to roll the throttle back which is the right grip. You should slowly let go of the clutch with your left hand. These movements should be done at the same time. If you let go of the clutch too soon with not enough gas then the bike will rush forward a second and kill the bike. If the bike is given too much gas, once the throttle is disengaged, the bike will lunge forward and you will be thrown off of the bike.
You should practice the movements very slowly before starting to ride. Slowly let off the clutch and turn the throttle back to give it some gas. You should pull the throttle only about 1/3 of the way in order to move slowly. If you pull too much such as pulling halfway or full throttle then the bike will have too much power and lunge forward. If the bike does lunge forward you should immediately let go of the throttle. A lot of new beginner riders find themselves in what is called "whiskey throttle," which is when the rider freezes up and rams into something.
Learning to Brake
There are two types of brakes on a dirt bike. The hand brake is the one that most beginners like to use. The hand brake is the silver handle on the right. The hand brake controls the front tires. The front brake should gently be squeezed, you should never snatch at it like you do when riding a bike. If you squeeze it fast it will press down hard on the front of the tires and could send you flying forward which means this would not be great for going down a hill.
The primary break that should be used is the foot brake. The foot brake controls the back tire and this provides the smoothest stop. Many beginners do not like using it because it doesn't feel as natural as the hand brake. But, it is good advice that you immediately start to learn how to use the foot brake to become a good rider.
About Body Positions
Body position is very important when riding on a dirt bike. All body positions are determined by the terrain that you riding on. When uphill riding, the rider will normally move their body forward to shift their weight on the bike. When riding downhill, the rider will mover their body backward in order to compensate for weight shift, gravity, and fork compression.
In order to move forward and backward the rider needs to be rather flexible. To become flexible on the bike then you should stand up whenever the bike is going over a bump. To stand properly on the bike you should slightly bend your knees and arch you back. You should grip the tank of the bike with your knees, this allows you to isolate your body from the mass of the bike.
Everything on the planet has a center of gravity. The higher that the center of gravity is on the bike, the more possible that you will have handling issues. When the bike goes forward then it rotates its center of gravity. This all means that the rider has to learn to be in sync.
Having correct body positions is the difference between life or death. You should make sure to move your body based on what terrain you are on and don't fight it.
Learning About the Gas Tank
The average dirt bike can run for about six hours long before the gas tank runs out. For the average rider, this is enough time to ride the bike. If you notice that you're almost out of gas then you should get off of the bike and look on the left side of the bike. You will see a silver switch that controls the gas tank. You should see "on," you should set it to "off" when you are done riding so that no gas leaks out, evaporates, or floods the engine if the bike tips over. You should also see "reserve" and you will have a bit more gas to get back to your truck or home.
The basic outfit when riding consists of:
- Long-sleeved shirt: The jersey should be nice and cool so that you do not overheat on the hot days. The fabric that dirt bike gear is made of helps protect you from scrapes and abrasions when you fall off of the bike.
- Long pants: The pants should be breathable, form-fitting, and durable instead of loose and baggy.
- Boots that go past the ankles: Some features that the boots should have are a shin plate, breathable, and lightweight.
- Gloves: The gloves will protect you from any burns or abrasions and can also prevent you from getting blisters. Gloves offer extra padding in order to have less vibration. It's important not to purchase gloves that are too big because they could get caught on the levers or slip off.
- Helmet: The best type of helmet is one that has a face guard on it. A helmet protects your brain and your jaw so that you don't break your jaw or a tooth falls out.
There are also clothes that are specifically for dirt bikes and offer extra protection against abrasions. It is important that all riders wear a helmet as to not receive head damage if they fall off. Once you purchase the basic clothing then you should try and get some extra padding. You should purchase some knee and elbow pads as well as a chest protector. A neck brace is also good protection but it is only needed if you are planning to do jumps or riding on a dangerous track. All of the braces protect you from receiving and spinal damage or injuries.
Dirt Bike Injury Statistics
A lot of injuries from dirt bikes are caused by uneven terrain, falling during jumps, and collisions into other riders. Some of the injuries are:
- Broken Collarbone: A broken collarbone is usually caused by the riders falling off of their bikes and when they try to stop themselves by stretching out their arms and then it puts pressure on the collarbone and causes it to break. The amount of pressure that is applied to the collarbone depends on how fast the bike is going and how fast the rider is flying when they are thrown off. If you receive this injury then you will most likely have to wear and sling for about 4 to 8 weeks. If the injury is more severe then you could possibly need surgery and will need to go to therapy.
- Dislocation of the Shoulder: A dislocated should is also caused by trying to break the fall with your hands except your shoulder stays intact. The recovery time depends on how severe the injury is. The dislocation of the shoulder can be very painful and there are rehabilitation exercises which are done until there is no longer any pain.
- Broken Wrist: Broken wrists are done from fall but it is when you fall directly on your hands and breaks the wrists. If you break your wrist then you will have to wear a cast for 6 to 8 weeks and go to physiotherapy after wearing the cast.
- Broken Ankle: Broken ankles and can be caused for falls or collisions with other riders. The bone will have to be realigned by a physician and sometime surgery is necessary if the break is too complex.
- ACL Tear: The ACL is linked to the thigh and the shinbone. The tear of the ACL can be caused when a rider attempts to make a jump while trying to maintain a bent position. The recovery from an ACL tear normally takes longer than a year. It most times need surgery and rehabilitation exercises to get back to riding correctly.
Riding dirt bikes is prohibited from riding on the roads. You should make sure to do some proper research to see where you can ride. You should never assume that it is okay to just ride anywhere. There are a lot of ATV parks that are dedicated to riding ATVs and dirt bikes.
Search online in order to find out about the rules and regulations for riding your bike. If you want to ride on the streets in the city then you would have to upgrade the bike to satisfy the local laws and receive a permit from the DMV. There are also bike hybrids that are versatile on both streets and dirt roads.
You also need to equip the bike with a silencer in order to follow sound regulations and you will also need a spark arrestor in order to avoid forest fires. Be respectful of any other riders or pedestrians.
Top 7 Riding Tips
- 1. Never ride on a paved surface unless it is permitted by the law because there is a possibility that you get hit by a vehicle
- 2. Never ride while under the influence
- 3. Anyone under 16 should have a supervisor
- 4. Never ride on remote trails
- 5. Take a hands-on course
- 6. Never let young riders to ride bikes that are too tall or too powerful. This could send them flying and could be seriously injured.
Riding a dirt bike is not that hard but it just takes a few rides in order to get used to all of the controls. It's important to note that you don't want to take any shortcuts when learning how to ride a dirt bike. Taking shortcuts can lead to bad habits and bad habits lead to dangerous situations. Learning and studying from these tips will help you become a pro in no time.
Now, you need to take some time to select which dirt bike stand is best for you. If you're still undecided, read through our reviews one more time and weigh the pros and cons of each option. Then, place your order to get your new stand delivered as soon as possible.